hi there
I am selling my 09 Specialized Pitch Pro (large) the price is £850 (but would consider offers). it has the same spec as below with some upgrades.
- Hope pro2 rear hub (gun smoke) built on a mavic 321 rim
- Brand new specialized Clutch SX tyres
- Front fork has recently had a full service by Tim Flukes.
- The bike has just had a full service so is ready to ride
The frame like most mountain bikes does have some war wounds but only so much to remove the paint in a few areas, (reflected in the price) .
If you have any questions or would like some photos the don't hesitate to drop me an email and i will get back to you you ASAP.
cheers
ben
FRAME
M4 Pitch frame, M4 tubing, double ORE downtube, DMD front derailleur mount, sealed cartridge bearing pivots, replaceable hanger, bolt on cable guides, 150mm travel
REAR SHOCK
Fox RP2, 2-position switch 1) ProPedal 2) full open, rebound adjust
FORK
Rockshox Pike 351 for Specialized, 140mm travel, coil U Turn, Motion Control damper, disc only, alloy steerer, rebound adjust, Maxle 360 included
HEADSET
1 1/8" threadless, black steel cups, loose ball bearings w/ seals
STEM
Specialized 3D forged alloy, 8 degree rise, 31.8mm 4 bolt clamp, S:60mm, M/L:75mm, XL:90mm
HANDLEBARS
Specialized mid rise, butted, 31.8mm, 660mm wide, 8 degree up, 8 degree back sweep
TAPE/GRIPS
Specialized Enduro, dual density
FRONT BRAKE
Avid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 203mm rotor
REAR BRAKE
Avid Juicy 3 SL, hydraulic disc, G2 Clean Sweep 180mm rotor
BRAKE LEVERS
Avid Juicy 3 SL
FRONT DERAILLEUR
Shimano M580 LX, E type
REAR DERAILLEUR
SRAM X-9, mid cage
SHIFT LEVERS
SRAM X-5, 9-speed trigger
CASSETTE FREEWHEEL
Shimano HG-50, 9-speed, 11-34t
CHAIN
KMC HG 73 w/ reusable Missing Link
CRANKSET
Shimano M532, 2pc design, 9-speed, replaceable rings w/ alloy outer
CHAINRINGS
22S/32S/44A 4mm thick outer, 4 bolt 104/64mm
BOTTOM BRACKET
Shimano outboard cartridge bearing design integrated w/ M532 2pc crank
PEDALS
Shimano 505 SPD, reflectors and cleats
RIMS
DT-Swiss 445D, 26", double wall disc, pin joint, eyelets, 32h
FRONT HUB
Specialized Stout disc, sealed cartridge bearing, 20mm thru axle, high/low flange
SPOKES
1.8mm (15g) stainless, black, alloy nipples
TUBES
Specialized, 1.2mm, schraeder valve
SADDLE
Specialized Enduro, 7mm hollow Cr-Mo rails, SL foam
SEAT POST
2 bolt micro adjust, 6061 alloy, black, 30.9 x 350/400mm
SEAT BINDER
Alloy collar w/ QR, 34.9mm clamp ID
