Viewing 10 posts - 1 through 10 (of 10 total)
  • Simpleton Question ….. Steepening frame angles ny 0.5 degrees – What affect?
  • letmetalktomark
    Full Member

    As above.

    Slightly confused.

    jam-bo
    Full Member

    Not much. same as Running a slightly soft front tyre…

    letmetalktomark
    Full Member

    So dip the front end a bit?

    footflaps
    Full Member

    It will make no discernible difference, changing the front tyre would have a bigger affect on handling.

    mikewsmith
    Free Member

    Your frame will be 0.5 degree steeper. Not much

    chiefgrooveguru
    Full Member

    Not a lot either way, but if achieved through shorter forks or more fork sag or smaller front tyre you’ll also lower the BB whilst if done through headset angle cups or a larger rear tyre or less rear suspension sag you’ll also raise the BB.

    letmetalktomark
    Full Member

    Just for clarity the change would come from using an internal headset cup rather than the external one presently.

    chiefgrooveguru
    Full Member

    Will the fork still clear the downtube?

    letmetalktomark
    Full Member

    chiefgrooveguru – Member

    Will the fork still clear the downtube?

    Yes.

    Bars/forks would still spin freely.

    ahwiles
    Free Member

    Just for clarity the change would come from using an internal headset cup rather than the external one presently.

    What affect?

    nearly sod all.

    hth.

Viewing 10 posts - 1 through 10 (of 10 total)

The topic ‘Simpleton Question ….. Steepening frame angles ny 0.5 degrees – What affect?’ is closed to new replies.