Can anyone on here recommend a socket set that is slim enough to fit into the end of the pedal so I can remove the nut inside the pedal on the end of the axle. None of the ones I have are slim enough.

I’ve tried the old trick of wedging a screwdriver in there and undoing it from the crank end but to no avail.

Ta

Tom KP

http://singletrackworld.com/forum/topic/hope-f20-pedals-2#post-7065474

also, this:

Any 1/4 drive will fit not 3/8

I personally take The 2 allen Key bolts out reguLar and purge with grease

Ta, forget I’d asked on that thread.