I’ve got the rrp tool and adapters for my linkage bearings on my transition but has anyone used them on there main pivot? Possible to double them up possibly or if not anyone recommend a semi cheap tool?

Have done all the pivot bearings on my smuggler with the RRP tool and correct adapters. Threaded bars they supply should be long enough.

Have done all the pivot bearings on my smuggler with the RRP tool and correct adapters. Threaded bars they supply should be long enough.

Ah right, so just the same process as removing the linkage bearings then?

Thinking back, I drifted the main pivot bearings out, then pressed them back in with the bearing tool.

What with hammer and screwdriver?

Hammer and a punch/drift