Viewing 16 posts - 1 through 16 (of 16 total)
  • RockShox Reverb Stealth Seatpost height?
  • giddyrob
    Free Member

    hey,

    looking at one of these.
    seat post

    wondering what height i need?

    This is my current post:
    30.9 x 350/400mm

    wondering if i need the 380 or 400? I run my post quite high on the post at mo so would the 420 be best?

    I have a pitch. The post doesnt go fully down when at lowesr point.

    Also what’s the difference between stealth and none stealth?

    Cheers

    Rob

    stevomcd
    Free Member

    On a stealth, the hose runs through your frame (and hence is nice and neat at all times).

    On a non-stealth, it runs outside the frame and connects at the saddle-clamp, so it gets a bit flappy when the seat is down.

    Obviously, you need a compatible frame to use a stealth.

    hopkinsgm
    Full Member

    Obviously, you need a compatible frame to use a stealth…

    …and the patience to thread the hose through said compatible frame 😉

    kayak23
    Full Member

    Obviously, you need a compatible frame power drill and an expired warranty to use a stealth.

    8)

    giddyrob
    Free Member

    Any idea what height size for bike?

    Ta

    thisisnotaspoon
    Free Member

    I had a medium pitch and (I think, pretty sure it was) the long reverb fit in the frame even when at it’s lowest setting.

    It sticks out the frame by about 190mm IIRC, check that’s enough as (IMO) the pitch was too short for a given size, at 6ft I’d have happily ridden it with an L top tube and M seatpost to get the Reverb in comfortably.

    qwerty
    Free Member

    Search google images for reverb size chart and look at Alltricks one.

    giddyrob
    Free Member

    Well, I have about 21mm from the clasp to the top of the post before the bars.

    That’s at the maximum height I ride it so want to get it as low as possible as the frame bends so need as small as i can get away with.

    From this info will the 380 be fine? Or even the 350 if I can get one.

    Cheers

    jam-bo
    Full Member
    giddyrob
    Free Member

    super, so just measure top(saddle) to kink/bend in the frame to get the A measurement.

    Ta

    jam-bo
    Full Member

    I’d say A is to the bottom of the saddle rails.

    giddyrob
    Free Member

    Sorry, that’s what I meant 🙂

    giddyrob
    Free Member

    hmmmmm just looking at the fox version… again…. what size?

    127mm or 101mm

    fox post

    qwerty
    Free Member

    davosaurusrex
    Full Member

    AFAIK you can’t get a 150mm Reverb in 30.9, I was looking the other day

    giddyrob
    Free Member

    sorry, my bad… lol

    400 should be perfect so 127/125 should do the trick 🙂

Viewing 16 posts - 1 through 16 (of 16 total)

The topic ‘RockShox Reverb Stealth Seatpost height?’ is closed to new replies.