Anyone have any recommendation’s for fitting 32mm stantion seals? Am a tight git and dont want to pay for the official tool.

an approiatte sized socket normally does the trick

or a cut off of waste pipe

Push it in with your fingers!

Liftman what size does you socket set go up to?

I’d assumed some plastic plumbing tubing would work.

I did mine for the first time at the weekend. For the oil seals I used a bit of 40mm pvc wastepipe. A 32mm socket will also work. Bit of grease on the outside + popping them in the freezer beforehand and they went in nicely. The grey dust seals you can just push in with your fingers.

Thanks for this