• This topic has 2 replies, 2 voices, and was last updated 14 years ago by IHN.
Viewing 3 posts - 1 through 3 (of 3 total)
  • revs lock out?
  • scruzer
    Free Member

    hi. i would like to remove bar mounted remote lockout and have crown adjuster/lock out ie non remote version. Is this a simple diy task or do i need to go to a service place and how much to have this done?? Cheers

    clubber
    Free Member

    The easiest thing to do is to swap with someone who’s got a non remote one – it’s very easy – just undo the cartridge from the fork (large spanner/socket) and plug in the replacement (maybe a slight oil top up too)

    The alternative is to remove the cartridge and then unhook the spring that moves the blue dial at the top back to the ‘open’ position so that you can set it where ever you want . Peter Poddy on here did a guide on that if you can find it.

    I’ve got a Reba (same cartridge) without remote lockout that I’d like to swap to a remote one if you’d be interested though. Drop me an email if so (address in my profile)

    IHN
    Full Member

    What clubber says. It’s a piece of pi$$ to swap the remote and non-remote cartridges.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
Viewing 3 posts - 1 through 3 (of 3 total)

The topic ‘revs lock out?’ is closed to new replies.