Overview Chat Bike Members News Women
Viewing 6 posts - 1 through 6 (of 6 total)
  • Removing and fitting a bottom bracket cup for a one peice crank.
  • juiced
    Free Member

    Well it's actually for a cheapo bmx. But whats the best way?

    Thinking hammering it out with a socket extension? Then a knocking the new one back in with a peice of wood and mallet. Maybe using a vice for support?

    cheers

    Posted 14 years ago
    GW
    Free Member

    yep, sounds like you'll be following the international standard fitting/removal instructions to the word. (except the vice part)

    Posted 14 years ago
    Rickos
    Free Member

    Without a headset press/BMX BB press, that's what I'd do – steady as she goes, keep it straight…BOSH! Job done.

    Posted 14 years ago
    juiced
    Free Member

    cheers. would a homemade press of somekind be better?

    Posted 14 years ago
    toys19
    Free Member

    Since I was 7 years old your initial proposal was the method I used. Do it.

    Posted 14 years ago
    juiced
    Free Member

    Thanks all.

    Posted 14 years ago
Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Removing and fitting a bottom bracket cup for a one peice crank.’ is closed to new replies.

Overview Chat Bike Members News Women