I am just about to pickup another bike and it is currently running hope M4s. I have a bit of a mental block when it comes to hope brakes so does anyone fancy a swap? Hoses are and will need to be long as the frame is a large FS.
Sheppie_hill AT sky DOT com
May also sell
I have juicy carbons, not used much and have some spare pads, I can measure hose if you are interested. Also have xts, model before the servowave levers (unused)
I am in Bristol so can cycle over I expect.
pics please!!
i have xt servowaves running 180mm discs if interestd??
cheers
steve
Hiya i am just about to remove some Hayes Nine 160mm brakes from my hardtail which has seen very little use. I have two sets of rotors to go with them and they are fitted to an XL frame so hose length should be fine. If you wanted pics i could send some. Assuming yours are the Mono Hope version would be happy to swap and use yours on my freeride rig. Am up at Mayhem if you can wait till then?
Cheers...Alex
Renton - can you mail me details? Hose length and pics... and also your email addr?
superdale - sorry not what I am after thanks
Steve
mate i need an emaill addy to send info too!! theres not one in your profile.
cheers
steve
p.s how old are the m4 and what discs etc are they running.
my discs have long hoses (front is running on 130 revs with loads of hose left and rear is on a 20" inbred frame which is looong)
Renton - it is written in my original post. sheppie_hill AT sky DOT com
Doh didnt read it properly!!
will get some piccys sorted and measure the hoses tomorrow
cheers
steve
This topic has been closed to new replies.
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
