So I’ve tracked down the annoying squeak to a pedal, which is moving about on the axel. Before I take it apart and ruin it completely, are v12s servicable/fixable? Is it likely a bearing has collapsed and I need a new one? If so where can you get them from?

Cheers

Found it

http://www.wiggle.co.uk/p/cycle/7/DMR_V12_Cartridge_Bearing/5300005208/

or

http://www.wiggle.co.uk/p/cycle/7/DMR_V12_Plain_Bearing/5300005209/

depending which end it is.

Dead easy to strip and clean v12s, and the bearing is easy to remove, but the bushing on the inboard side is a bit of a PITA to prise out.

If you just want to kill the squeak for the time being, strip, clean and regrease. It’s literally a ten minute job to do both pedals with an allen key and a socket.

yup that’s what I do with mine, never had to replace a bearing yet. The little bit of play in them just seems to stay that way and never get any worse.

Kev

I’ve got a r/h v12 you can have for a fiver if yours is karked?

it is drive side.. what colour finbar?

I wasted an hour and destroyed a screwdriver totally failing to remove the inboard bush from a V12 🙁