Viewing 21 posts - 1 through 21 (of 21 total)
  • PC971 or PC991 MTB chains?
  • bonesetter
    Free Member

    What’s your choice?

    On_one are doing the 971’s for a tenner, which although is good, the 991’s you can pick up for 20 when on offer…?

    votchy
    Free Member

    971’s wont be good enough for you 😉

    bonesetter
    Free Member

    😆

    wwaswas
    Full Member

    on-one do the 991’s for £17.99

    Andy
    Full Member

    I’d still prefer KMC

    MarkN
    Free Member

    951’s work a treat here.

    iain1775
    Free Member

    Kmc x9l
    Ebay

    superfli
    Free Member

    951 are fine

    mboy
    Free Member

    KMC last longer

    No performance difference between the 971 and 991 though, maybe a few grammes but that’s it.

    For £9.99 each, it is indeed cheaper than trade price for sure.

    bonesetter
    Free Member

    What’s meant to be the spec difference between the two?

    Andy
    Full Member

    971 outer plates are chromed. 991 inner and outer plates are chromed IIRC. KMC still last longer. Cheap chains a false economy if causes Cassette to wear prematurely

    Scienceofficer
    Free Member

    No. SRAM 991’s are bright nickel coated.

    timc
    Free Member

    had 951/971/991 on various bikes, just get the cheapest, you wont notice any difference

    oliverd1981
    Free Member

    991’s are twenty better

    andysredmini
    Free Member

    Are the power links the same?
    Best bit about a pc991.

    unovolo
    Free Member

    If its a choice between the 2 Sram then get the 971 ,once its covered in oil and mud it wont make any difference.

    Although my money goes to KMC ,not much difference in shift quality but found the Sram ones seem to rust quicker and stretch sooner.

    bonesetter
    Free Member

    Neverr tried a KMC. The Shimano’s seem to last a few months at best.

    Which KMC would you recommend?

    cp
    Full Member

    KMC X9.93 are great – rust free, long lasting, excellent shifting.

    bonesetter
    Free Member

    Does KMC use the power link system?

    Pukeko
    Free Member

    I have not used KMC but it looks like thay have own power link system http://www.chainreactioncycles.com/Models.aspx?ModelID=25439

    Pukeko
    Free Member

    I have not used KMC but it looks like thay have own power link system http://www.chainreactioncycles.com/Models.aspx?ModelID=25439

Viewing 21 posts - 1 through 21 (of 21 total)

The topic ‘PC971 or PC991 MTB chains?’ is closed to new replies.