is it possible or has anyone converted the back QR fatty wheel to a 12mm bolt through? with some type of adapter?
cheers

If you have the EL Guapo Pro hub versions it should be entirely feasible as they use the same hardware as the standard width hubs. I’d have to look into the numbers and check to see if we have suitable end caps in stock. I’m guessing we did them with the Hesperus wheels so i strongly suspect its possible.

email me, its in my profile.

Superb, just what i want to hear 😀 im emailing you now 😉

http://www.planetx.co.uk/i/q/WSELSEC/replacement-end-cap-pair-for-el-guapo—selcof-hub
Which shows the 12mm out of stock.

Maybe the Vision adapters will work on the El Guapo hubs?http://www.planetx.co.uk/i/q/WSVISKIT/vision-axle-kit-for-6-bolt-disc-wheels

Lawmanmx, what bike have you found that has the clearance for a converted rear fat wheel eqipped with at least a 26×3.5″ tyre?

El Guapo hubs made by Chosen who make various hubs sold under Stans, Sun, 9:Zero:7 brands amongst others

just to finally answer my own question, Yes it can be done, E15 and E16 On one adapters do the trick, and big thanks to James and Simon from On-one 8)