Viewing 10 posts - 1 through 10 (of 10 total)
  • On One chain tugs – is it me
  • swisstony
    Free Member

    I can’t see how ive got it wrong but the screws aren’t long enough to but up to the end of my dropouts so are no use at all.

    It’s a Spesh P3 frame with SS dropouts and the qr is near to the end to get tension but still 5mm or so of drop out left.

    STATO
    Free Member

    they work fine on on-ones which have loooong dropouts, the ones on the P3 are tiny and quite a few designs of chain tensioners prob wouldnt work.

    brant
    Free Member

    take the nuts off.

    swisstony
    Free Member

    really! 😆

    i’ve done that already but they’re still 3 or 4mm short, do you have any longer bolts?

    poppa
    Free Member

    Chain tugs? This is a polite, family forum thank you very much.

    brant
    Free Member

    i’ve done that already but they’re still 3 or 4mm short, do you have any longer bolts?

    No – but they’re just M4 threaded bolts – B&Q can sort you out.

    andym
    Free Member

    Put a few more links on the chain?

    swisstony
    Free Member

    off to B&Q then

    andy that will make it worse

    Nick
    Full Member

    take a chain link out

    swisstony
    Free Member

    not enough give for that either, i could get a half link i suppose but that’s more expense.

Viewing 10 posts - 1 through 10 (of 10 total)

The topic ‘On One chain tugs – is it me’ is closed to new replies.