Viewing 8 posts - 1 through 8 (of 8 total)
  • Not getting full travel from Reba Solo Air
  • stayhigh
    Full Member

    Evening all

    As above, I only appear to be getting around 100mm travel from my 120mm forks.

    If I pump them up to around 150psi they go to around 110 but when I deflate to ~125, which is about right for my weight he travel drops back to 100.

    Any ideas what could be causing this? The bike is a 2013 T129.

    Thanks all

    iainc
    Full Member

    Have you tried letting all the air out and seeing if they fully compress ? Sometimes the positive and negative air chambers get out of sync.

    stayhigh
    Full Member

    Thats what I did earlier but have just tried again.

    All the air out and then go all the way down but only give about 90mm when reinflated.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    Rscott
    Free Member

    Serviced recently?

    tomuch oil in the lower legs or compression side maybe

    willv
    Full Member

    You can let the neg air out of the valve in lower leg under the bolt. Be sure to let all air out of pos first. This may cure it initially. If it doesn’t strip em down as some grease may be blocking the transfer port.

    stayhigh
    Full Member

    The bike was brought new last june and the fork hasn’t been serviced yet.

    It may just need that doing but wanted to rule anything else out first.

    stayhigh
    Full Member

    In the bottom of the leg there is a black 5mm allen bolt but I can’t seem to undo that. Is this the negative air? valve?

    stayhigh
    Full Member

    Ok so I figured out it is but I still can’t undo the bolt so its largely moot 🙁

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Not getting full travel from Reba Solo Air’ is closed to new replies.