Viewing 8 posts - 1 through 8 (of 8 total)
  • Need help finding geometry chart for 2010 Turner 5 spot.
  • renton
    Free Member

    As title really.

    I can’t seem to be able to find the geometry chart for the 2010 Turner 5 spot.

    I can find the 09 and 11 models but not the 10.

    Any help would be great.

    Cheers
    Steve

    NorthCountryBoy
    Free Member

    This should have the info you require AFAIK the 2010 was basically the same as 2009 but with the revised seat tube gusset ( burrito v taco )
    The 44 mm head tube and slightly slacker head angle was on the 2011 frames.
    They also ran the rear mech cable through a hole in the rear triangle in 10 or 11 can’t remember when it was introduced. The 2009 rear triangle had it cable tied to the side. Wasn’t a problem really.
    Bit of a turner geek here 🙂

    Edit didn’t you sell yours?

    http://www.turnerbikes.com/turner-pdf/catalog/2010_turnerbikes_catalog.pdf

    renton
    Free Member

    Yep sold mine.

    Just wanted to compare geometry.

    I believe the 10 was longer than the 09 but shorter than the 11.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    NorthCountryBoy
    Free Member

    Longer where? Top tube?
    I don’t think so, could be wrong. Think they only made very minor changes.
    I went from a 2009 to a 2011 both in medium. They were very similar.

    renton
    Free Member

    Its alright Ive found it.

    cheers

    Steve

    NorthCountryBoy
    Free Member

    Was there much difference in length?

    renton
    Free Member

    Not really to be honest.

    Suprised at how short the reach is though !

    NorthCountryBoy
    Free Member

    I think turner used to recommend a 90 mm stem which wasn’t unusual for the usa. Always ran mine with a 75 mm stem on a medium. Tried a large frame with a 50mm stem could have riden either really I’m 5’8.
    Had a 2012 version with 150 pikes, that was a superb trail bike. On a Burner now 🙂
    ,

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Need help finding geometry chart for 2010 Turner 5 spot.’ is closed to new replies.