bodged up my DIY attempt at changing a wheel bearing, now need a complete one of these but no idea what it’s called….please 😀

Front hub steering assembly

Falangi

Thrunge gasket.

Metric, obviously.

I name it ‘Edward’.

Upright casting

dammit people! don’t mock the financially injured here…

Doofer

Angled clunge spigot NS.
or it could be a front hub assembly and balljoint from a small hatchback.

Thatll be your ooovaaavooo, left hand if I’m not mistaken 🙂

What did you do to that one ?

Steering knuckle (from the bottom of a MacPherson strut), hub and wheel bearing.

Are all 3 of the main parts really knackered? Probably also has some circlips that hold the bearing in and don’t forget a new driveshaft nut.

hub carrier

used a 20T press to get the old bearing out (removed circlip 1st) bearing didnt budge but managed to bend the disc calliper mount!

so now need new hub, bearing and knuckle thing

cheers all sorted

Next time if really stuck heat with oxyacetylene to make hub assembly expand. Bearing will come out easier then.

doesnt even need to be oxy.

im surprised you didnt destroy the bearing before you destroyed the steering knuckle tbh ….