Viewing 4 posts - 1 through 4 (of 4 total)
  • Mondraker Dune Geometry/sizing
  • koolkurt
    Free Member

    Any owners out there? Im toying with the idea of getting one to replace my now out of action Enduro sl. I notice some people have somewhat of an issue with top tube length which im finding a tad off putting as no shops remotely close to me have any to demo. Find the sizing of my current bike in medium pretty much bang on the money ( top tube length 591mm vs that of 575mm for the dune in med , dune in large comes in much closer at 595mm! ). im 5’9 by the way.

    Ta

    K.

    lister11
    Free Member

    Running a medium dune. With a, shorter than stock, 50mm stem and 711 bars.

    Feels great and I’m 5’9″ too. Could always keep the 70mm stem for the difference.

    I really like it but occasionally feel I should have looked into a foxy with 160mm forks a little more.

    chakaping
    Free Member

    Hello, I had a medium and I’m about 5ft 8.5in.

    It does have a shortish TT, but I had a 50mm stem and 725mm bar on mine and never really felt cramped for space or out of breath like on some bikes.

    I thought the geometry was pretty much perfect for me for an all-mountain bike. And the light weight made it surprisingly quick on flatter XC rides, unless the going was soft.

    koolkurt
    Free Member

    Thanks for the advice lister and chakaping!

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Mondraker Dune Geometry/sizing’ is closed to new replies.