Hey everyone, have quite a few bits and bobs for sale. I’ve stripped a hardtail for parts to make an ultimate hardtail it was silly having two. Some new and old parts. Most of the new parts were for my new project but I really need to get a new car so needs must, etc. AS ALWAYS OPEN TO SENSIBLE OFFERS, any questions my email is in my profile or just comment below. There are loads more photos here: http://www.flickr.com/photos/samwrightphotos/sets/
ALL ITEMS INCLUDE POSTAGE PRICES TO THE UK!
The link above is all set out in sets making it easy to find everything.
Considering selling the road bike as I just don't use it enough. Any interest? I think it’s done around 40 miles, don't even think the cables have stretched yet. It will come with the keo easy pedals and cleats, blue bottle cage and strada computer. Looking for around £550. It is a M/L which is really a 56cm in Giants sizing.
2012-02-08 21.42.59 by smwright94@gmail.com, on Flickr
Mondraker Dune frame 2010 medium. Looking for £850 (see description below)
New dune frame rrp’s for £1599.99
I love this bike a lot but it’s on the slightly small side for myself so wanting to see if there is any interest so I can buy a large one which is green the new one so I will include some blue kit with the frame if there is interest in it. Will include the blue hope bb, blue charge seatpost, headset, blue hope qr, no you can’t have the limited edition blue charge seat I’ll give you a new charge spoon and some bearings which have been used in the frame for a few months. I just replaced them about a week ago but they actually didn’t need replaced which was annoying. I may throw in some other bits if you ask nicely. Just serviced the rear shock too.
Before bearing change…
Dune by smwright94@gmail.com, on Flickr
After: taaa da!
2012-01-11 21.15.37 by smwright94@gmail.com, on Flickr
Spank Smoke DJ frame £200. Brand new, never used.
http://www.winstanleysbikes.co.uk/product/18880/Spank_Royala_Edition_Smoke_DJ_Frame
Story with this I was going to build it as sort of a kick around bike and er that didn’t really happen, I will chase and face the bottom bracket and reem and face the headset. Basically over £50 (FOC) work at your local bike shop, this allows the headset to sit in the frame straight and not pipe cut your steering tube and again ensure the bottom bracket goes in true and not cross threaded.
Spank Royala Edition Smoke DJ Frame
Part of Spank's Royala Collection - the Royala Smoke. Anodized powdery gold with the usual Smoke comforts. With the Spank Smoke you'll make an investment for the future: You can leave it for your children. It is a nearly indestructible Street/Dirt frame.
• 4130 Cro-Moly
Fork : Max 130mm
• CNC dropouts
• Longer down tube gusset
• 14mm to 10mm rear axle adapter
• 25mm adjustable wheelbase
• ISCG mount
• 24"/26" brake mounts
• Rear wheel lock inserts
• Seatpost diameter: 27.2 mm
• Seat clamp: 29.8mm
• Axle type: 10mm or 14mm
• Axle width: 135mm
• Size: One Size
• Colour: Gold
2012-02-08 21.24.20 by smwright94@gmail.com, on Flickr
Raceface Ride DH crankset £30
Few scratches here and there. Solid crankset.
2011-10-30
11.57.13 by smwright94@gmail.com, on Flickr
Fatty’s flatties platform pedal, sealed bearing pedal, gold. RRP £74.99 BRAND NEW includes spare pins.
Sell £ 60.00
2012-01-18 17.09.26 by smwright94@gmail.com, on Flickr
DMR v8’s blue acid colour. Used. Good condition. No play. £15
2012-01-22 18.59.29 by smwright94@gmail.com, on Flickr
Nukeproof generator hubs on funn rims £250
Used a few times. Hand laced. Really solid wheel set just I have two sets of hopes I don’t need a spare one only keeping the hopes because they are nice and colourful! Rear is standard 135mm with qr. Front is 20mm both rear and front can be changed to any sort of axle size e.g. front 15mm or qr, rear 10mm, 135mm etc…
Hubs cost me: £178.98 Spokes: £28 x 2 = £56 Rim £48 each, £96 Building wheel : £20 x 2 = £40
£330.98 in parts with labour you would be £370.98.
2012-02-08 22.19.07 by smwright94@gmail.com, on Flickr
Handbuilt On-off wheels £120
Came off my 2010 Mondraker dune, spins true. On-off is Mondrakers component brand. 20mm axle. Few scratches on the paint, really didn’t last long on the bike because I got a set of hopes no dings etc…. £120 for the set. Just relaced the rear wheel.
2012-02-08 22.42.54 by smwright94@gmail.com, on Flickr
Hope evo hubs Front 20mm Rear 12mm (135mm) Red. 36 hole Brand new. I would happily swap out the axle for in the rear to fit any bike eg standard qr and front to a 15mm or qr
Front £55 Rear £129.99
I could lace these onto a rim if you wanted to, just let me know.
Hope hubs by smwright94@gmail.com, on Flickr
Halo combat 26 inch rim. 32 hole. Used fairly well, perfectly round, just general paint scuffs
£20
2012-01-22 18.45.00 by smwright94@gmail.com, on Flickr
Handbuilt wheels
Hope pro 2 on mavic ex 717 never used, Qr. Hope hoop. Can change to 15mm or 20mm RRP £125.99
Sale £100 posted
2012-01-18 16.59.40 by smwright94@gmail.com, on Flickr
Atomlab 920 hub RRP £60 + on Mavic 721 rim £ 50 on Dt swiss spokes £36 + labour charge of at least £20 to build. = £166
Sell for £90.
Brand new. Never used. Actually won a rear wheel of these so bought a front to match. But had to use the rear because I decided to break my old 521 in a race where I later sold that bike with the rear wheel still on it so this has sat in my garage since. Perfectly true.
2012-01-18 17.00.51 by smwright94@gmail.com, on Flickr
Hope gold QR, £14 Brand New
2012-01-18 17.06.14 by smwright94@gmail.com, on Flickr
On off rear qr £8 Halo porky front qr Brand New £8
2012-01-22 19.01.39 by smwright94@gmail.com, on Flickr
Hope seat clamp, Blue, qr, 30.0, Brand New RRP £19.99
Sell for £ 14
2012-01-18 17.06.47 by smwright94@gmail.com, on Flickr
Raceface 2012 respond cranks £60
Ridden them for about 2 weeks, little bit of paint rub hardly noticeable. Really nice crankset but I wanted some slx cranks so I don’t need these. You can fit a granny ring onto the cranks or just run it single or double with bash (shown in picture) If you would like the bash and rings add £15 to the price.
2011-10-30 11.56.16 by
Lizard Skins Peaty Lock On Handlebar Grips Brand new! RRP £21.99
Graphite with red jaw locks £19 Or blue grips with gold clamps
2012-01-18 17.21.15 by smwright94@gmail.com, on Flickr
2012-01-22 18.36.52 by smwright94@gmail.com, on Flickr
All following grips £9
Token Double Lock On Grips, Green lock clamps few scuffs nothing major
Ragley Logo Lock On Grip - Super Soft Black slightly used few scuffs on the clamp see pictures
Charge surface grips, blue
2012-01-22 18.36.23 by smwright94@gmail.com, on Flickr
2012-01-22 19.31.26 by smwright94@gmail.com, on Flickr
Answer Pro Taper 780 DH Riser Bar 2011 - Red - 1/2" Rise - 780mm cut to around 740mm - 31.8mm £40. Few paint marks on and around the clamp area however this won’t be seen once the stem is on.
2012-01-22 19.03.23 by smwright94@gmail.com, on Flickr
On-off bars. White. Paint missing in areas see more photos - £15
2012-02-08 21.25.51 by smwright94@gmail.com, on Flickr
Sunline V1 DH Stem - Grey 40mm 1.1/8" 31.8mm £45 fairly new. No scratches or chips.
2012-01-22 18.42.37 by smwright94@gmail.com, on Flickr
Truvativ Hussefelt stem 40mm Very little use. £15 
2011-10-30 12.09.42 by smwright94@gmail.com, on Flickr
2011 Fox 32 RL forks 140mm
2011 fox 32's. Ridden probably 10 times with them, prefer the rockshoxs I have already. 15mm axle. They are a taper, 195mm steerer! 140mm travel. Slight paint scratch on the left leg NOTE NOT ON STANCHION left lower leg i.e. bit of paint missing… Brand new uppers as we sent away set of 32’s to be warrantied however mojo put a tapered steerer in and the guy needed a 1 1/8th hence mine were new so we swapped them over my genesis can take both so made no difference to me. Need any help of if they will fit your frame or what headset you may need to ask?
2011-10-18 19.49.23 by smwright94@gmail.com, on Flickr
Hope Bottom Bracket brand new Gunsmoke, 68/73mm - £60 RRP £72.99
2012-01-18 17.05.46 by smwright94@gmail.com, on Flickr
Shimano XT/SLX Bottom bracket 68/73mm Brand New, £ 20 RRP £29.99
Note can be used with all Shimano Hollow Tech II cranksets.
2012-01-22 18.38.26 by smwright94@gmail.com, on Flickr
Magura wavy rotor brand new 160mm £15 posted also have a slightly used one for £10. RRP is over £30
2012-01-22 18.58.36 by smwright94@gmail.com, on Flickr
Fox Float rl rear shox £100 Perfect condition
8.5 by 2.5 just replaced the seal kit. i.e 216mm by 63mm. So will fit say the orange alpine, kona stinky. Need any help on if it will fit your frame I will do my best to help.
2011-12-28 22.25.33 by smwright94@gmail.com, on Flickr
Formula Oro K18 brake set RRP £224.99 with
Straitline Lever Blade Set - Blue RRP £64.99 = £289.98
Will sell for £135.
Only reason for sale is because I have some Formula rx’s. The oro is super powerful, will come fully bled. Front hose length around 90cm and rear over 140 cm, This fitted my mondraker dune 160mm front and rear fine with room to pull a full x-up so should fit most bikes.
2012-01-22 19.04.10 by smwright94@gmail.com, on Flickr
Formula oro levers. £15
2011-12-28 22.25.59 by smwright94@gmail.com, on Flickr
Magura Julie hp rear disc brake. Slightly used. Hose length 130 cm. £35
2012-01-22 18.37.31 by smwright94@gmail.com, on Flickr
I do have the front one somewhere just can’t find it at the moment
Hope Pick n Mix headset (B) cup. £20
Lower cup. 43.95mm, 1 1/8th. Its been fitted once hence the scratches. But never ridden because the forks hit the down tube of my frame.
2011-12-28 22.33.03 by smwright94@gmail.com, on Flickr
Hope headset, Gunsmoke, 1 1/8th Brand New RRP £72.99
Sell for £60.00
2012-01-18 17.04.10 by smwright94@gmail.com, on Flickr
Cheers Sam. X
More pictures here,
http://www.flickr.com/photos/samwrightphotos/sets/
