• This topic has 7 replies, 7 voices, and was last updated 6 years ago by keir.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Mavic road wheels – Shimano / Campag compatibility
  • Legoman
    Free Member

    I’ve been offered a pair of Kysirium Elites which are currently on a bike with a Campag groupset. I’m running Ultegra & wondered if these wheels will accept my Shimano cassette?

    Cheers.

    joemmo
    Free Member

    Campagnolo cassettes have a different spline fitting to Shimano so the chances are you might need a new freehub to fit.

    fossy
    Full Member

    New Mavic freehub needed to swap compatibility.

    Legoman
    Free Member

    Cheers, that’s what I thought.
    Would it be possible to do a straight swap over of the two freehubs (both mavic 11-speed)?

    Pickers
    Full Member

    Isn’t the 11s sprocket spacing so similar between Shimano and Campag as to make them interchangeable?
    If you can, pop the wheel in and just see if it will index. Got to be worth a try….

    Klunk
    Free Member

    do a set of wheels usually come with a cassette ?

    247cycleshop
    Free Member

    You just need to buy a Mavic HG11 freehub body and swap it over

    It is normally a 5 minute job

    keir
    Free Member

    the cassette spacing is basically the same on all 11 speed, but campag cassettes are so expensive that you could probably buy a shimano one and a freehub body for the same money, and be quids in at the first cassette replacement

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Mavic road wheels – Shimano / Campag compatibility’ is closed to new replies.