Viewing 4 posts - 1 through 4 (of 4 total)
  • Mavic Crossride freehub slipping
  • stumpy_m4
    Free Member

    I`ve just got my crossrides out of the shed to put on my bike and ive noticed the freehub keeps slipping ?? never noticed last time i rode the wheels which must of been 6 months or so..
    Question is where can i get mavic freehub repaired/replaced ??
    cheers In Advamce Tony

    Kahurangi
    Full Member

    They're dead easy to have a bash at servicing yourself. Mavic site has some instruction that are so-so, but take them off with a 5mm hex key into the axle, pull the freehub body off. there' just two pawls with a spring under each.

    At least that's the case with mine (07 or 06 models)

    AdamM
    Free Member

    You'll probably find the lubricant in the freewheel has got sticky while they've been ignored in the shed. A strip and relube should see you right (oil, not grease). Loads of instruction videos around.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    showerman
    Free Member

    BE VERY CAREFUL when pulling the freehub body off as the springs under the paws can fly off. dead easy to service even i can do it :D, clean out a little circlip holds the paws in, just use a very light oil grease can be a little to thick and will cause the paws to jam

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Mavic Crossride freehub slipping’ is closed to new replies.