Viewing 6 posts - 1 through 6 (of 6 total)
  • Longshot; Those cheap 27×11/4 bolt on wheels Q
  • oldgit
    Free Member

    Anyone got them or work in a place that sells them?

    I know they have a massive ammount of axle spacers, and I need some bolt on wheels for an old bike with 115mm hub spacing.
    I’m hoping to be able remove some to make em fit.

    Just need to be sure the actual hub is narrow enough.

    spev
    Full Member

    If your lbs gets em from Moore and large then they usually have one really big spacer which you can remove and replace with smaller ones to suit, I’ll have a proper look tomorrow

    bananaworld
    Free Member

    I’ll take a peek tomorrow too at the occasionally round wheels ‘we’ get from Fisher.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    oldgit
    Free Member

    Thanks
    See the old frame would have run one of three factory options; fixed/free, Sturmey Archer or 4 speed.

    spev
    Full Member

    Right the one I’ve got here has a 14mm spacer on the drive side and the hub shell is 89mm (actual shell width measured from outside edge to outside edge not including axle or spacer etc)

    bananaworld
    Free Member

    (Sorry for lack of update: we didn’t have any of them in stock, unusually, though not uncharacteristically as we seem to have nothing in stock these days…)

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Longshot; Those cheap 27×11/4 bolt on wheels Q’ is closed to new replies.