Viewing 12 posts - 1 through 12 (of 12 total)
  • Lefty 2.0 bearing reset
  • r8jimbob88
    Free Member

    How often do you reset yours? Mine need resetting after every ride. Is that normal? I lose about 20mm travel each after each ride which a quick reset sorts out. Bit of a pain though!

    eddiebaby
    Free Member

    Two or three times a year.

    parkesie
    Free Member

    On my 140 every 2 months or so. On my 90 not once in 4 years.

    ChunkyMTB
    Free Member

    Every couple of months.

    wobbliscott
    Free Member

    Not sure what lefty I had but I used to do it pretty much after every ride. It’s only a 5 minute job so just became part of my post ride check/maintenance ritual. Was no big deal if I didn’t do it for a few rides though.

    jonnyrockymountain
    Full Member

    James, doesn’t sound right that pal?

    jonnyrockymountain
    Full Member

    Also is it the new 2 spring internal?

    r8jimbob88
    Free Member

    Yep new 2spring upgrade. My mate has the same issue with his and has to reset it after every ride. Both have 2spring upgrade.

    We both race XC and I’d say the forks get a proper hammering. Not sure if this contributes to it! Will try lower pressure see if that helps. Currently running 95psi and weigh 72kg.

    jonnyrockymountain
    Full Member

    I’m 100psi at 75kg, also had the 2 spring upgrade, and have been faultless

    r8jimbob88
    Free Member

    Have you measured the travel recently? The only reason I knew it needed a reset was because I measured the travel with a tape measure. It’s hard to tell the difference through feel alone before and after a reset to be fair.

    Skankin_giant
    Free Member

    No problem here, had it since October.

    jonnyrockymountain
    Full Member

    James yeah full travel here pal.

Viewing 12 posts - 1 through 12 (of 12 total)

The topic ‘Lefty 2.0 bearing reset’ is closed to new replies.