Viewing 12 posts - 1 through 12 (of 12 total)
  • Just gone 11×1
  • pickle
    Free Member

    My old 9 speed cassette and rear mech were shot so i took the plunge and went 11×1 shimano XT.

    It was a doddle to set up and runs like a dream (need to take a few links out of the chain though)

    All the bits

    Comparison of cassettes

    All done and well pleased

    Vortexracing
    Full Member

    Just about to pop into Evans and pick mine up for both bikes. 🙂 Just need 2 x chains and front rings.

    What chainring did you go for 30 or 32 BTW?

    I’m assuming a SRAM chain will work OK, it did on 9 and 10 speed, anybody know if it will be OK?

    pickle
    Free Member

    I believe an SRAM will work but I just went with the XT. I went for a superstar 32 front to start with.

    rOcKeTdOg
    Full Member

    deffo need some links out of that chain

    pickle
    Free Member

    Yep sure do

    Teetosugars
    Free Member

    About to do the same to my Krampus.
    Just not sure of the chain line, so need to get that squared away before ordering it all..

    Now that’s a first! Evans cheaper than CRC! Under £300 for the groupset?
    Mint.

    MoreCashThanDash
    Full Member

    I have a great mental image of 11×1!

    I found 1×11 a better option 😉

    DT78
    Free Member

    Dumb question are 9 and 10 speed chains ok on a 11 speed setup?

    sillyoldman
    Full Member

    No – you’ll need an 11 speed chain.

    mildbore
    Full Member

    Running a sram chain with xt1x11, all works fine

    Kryton57
    Full Member

    Now that’s a first! Evans cheaper than CRC! Under £300 for the groupset?

    Even cheaper at Ubyk…

    Vortexracing
    Full Member

    Running a sram chain with xt1x11, all works fine

    ta

Viewing 12 posts - 1 through 12 (of 12 total)

The topic ‘Just gone 11×1’ is closed to new replies.