• This topic has 1 reply, 1 voice, and was last updated 11 years ago by br.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Hope Tech Lever Replacement
  • JonBurns
    Free Member

    So I bent one of my tech levers a week or so ago and subsequently purchased a new lever.

    Last night I took the old lever off the bike but having some trouble getting the reach adjuster screw off it and the brass plunger.

    I’ve take the circlip off teh end of the screw but just seems that the end is too big to pass through the screw hole.

    With the plunger I haven’t tried to get it out yet but it is recessed somewhat into the lever.

    I just thought it would be a simple case of swapping things over but not so sure now.

    Any help appreciated.
    Jon

    br
    Free Member

    look down the end (opposite to the lever), there is a small grub-screw that ‘releases’ the lever

    Took me a while too to work it out too

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘Hope Tech Lever Replacement’ is closed to new replies.