Viewing 6 posts - 1 through 6 (of 6 total)
  • Hope SS 32 hole disc hub and 819 rim what size spokes?
  • postierich
    Free Member

    Looked on a few wheel building sites but no luck so far, button ready to be pushed on the crc site to buy the rim and hub!

    Ta rich

    thomthumb
    Free Member

    hub dims are here

    wheel pro makes that 259.1 on either side.

    edit: assuming 3 cross.

    postierich
    Free Member

    Crc only stock 258 260 in the nearest size bearing in mind its a ust rim I take it I am better of getting the 260,s

    Ta rich

    wwaswas
    Full Member

    bear in mind that CRC ship 14mm not 12mm nipples – this will have an effect too.

    thomthumb
    Free Member

    i always go short.

    don’t know anything about ust…

    cynic-al
    Free Member

    I’d get the 258s – you are meant to use longer nipples (14 or 16mm) in any event.

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Hope SS 32 hole disc hub and 819 rim what size spokes?’ is closed to new replies.