Viewing 4 posts - 1 through 4 (of 4 total)
  • Hope Pro 3 SP AM4 hub specs for wheelbuild.
  • rebutz
    Free Member

    Hi all. Looking for some help with specs for this hub set for a re build into 650b. I have some conflicting spoke calculator info.

    Hope has said 288mm (they should know I guess) but I am getting 291mm using my own measurements and don’t want to cocktail it up. Erd is 584mm

    Thanks

    Onzadog
    Free Member

    Do calculators work with straight pull? If it were me, and it was a rebuild, I’d compare erd of the two rims, then add that to the existing spokes.

    rp16v
    Free Member

    if its a hub/rim combo that hope have sold in the past just call them and ask i did this with some pro2’s and xc717’s handed over the info no problem.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    rebutz
    Free Member

    Thanks for the replies, i am building a 650b from what was a 26er so no direct comparisons. the DT swiss spoke calc does SP as do a couple of others.

    I have realised that i had the offsets wrong which is why i had the discrepancies with the hope figure, all is now coming out at 288mm. so going to get ordering.

    cheers

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Hope Pro 3 SP AM4 hub specs for wheelbuild.’ is closed to new replies.