Viewing 6 posts - 1 through 6 (of 6 total)
  • Hope Pro 3 AM4 Servicing
  • pbooker1995
    Free Member

    Already asked before but now i have a bit more info.

    My rear hub bearings need changing and i’d like to do it myself so i need the tools and the bearings. Ive had a look at the exploded view of the AM4 rear hub and it seems i need 2 17X32X7 bearings for the hub shell.

    Does anyone know the code Hope use for these bearings?

    Also, does anyone know where to get the tools from? Ive found some on UKBikeStore but it only says they are for the Pro 3 hub and not the AM4 hub.

    Cheerd

    pbooker1995
    Free Member

    Sorry. 17x32x8 for the hub shell.

    galactus
    Free Member

    Ditto 🙂

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    Dales_rider
    Free Member

    I use sockets on my Hope hubs, one that will take the bearing inside. Taping the axle, plastic hammer, to remove one side then the other easy enough.
    These are the tools I use, looks like an inch and a 1/4 to take the bearing which is near enough 32mm

    and a 21 for tapping them in 😀

    coatesy
    Free Member

    Pro 3 SP AM4 seem to have their own bearings, the ones you’re asking for have the code S17328 at £5.85ea, or HUB3AM4R for the complete set at £27.23

    galactus
    Free Member

    Cheers coatesy 😀

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Hope Pro 3 AM4 Servicing’ is closed to new replies.