Viewing 3 posts - 1 through 3 (of 3 total)
  • Geometry / fork question…
  • tmb467
    Free Member

    29er hardtail with 68deg head angle – trying to decide on a fork

    Do I get a 140mm Yari RC (51mm offset) or a 140mm XFusion McQueen Roughcut HLR with 46mm offset but run it with a -2deg angleset

    And if I go Yari, do I put the angleset in anyway…will it make any difference (other than the fact that I’ve now bought it and a new headset will cost me more)

    or do I just dig out some kittens…?

    or will I even notice, especially if I dont ride it

    wobbliscott
    Free Member

    When I went to 51mm offset from 46mm I did notice a difference. Not necessarily better or worse, just different. It’s only an effect I think you’d notice if you did a back to back. I’d go for whichever is the best fork (or you determine to be the best fork).

    Andy-R
    Full Member

    Surely if you’re going to use the -2 degree headset it makes most sense to use the fork with more offset, as slackening the head angle will increase effective trail.

Viewing 3 posts - 1 through 3 (of 3 total)

The topic ‘Geometry / fork question…’ is closed to new replies.