I have decided to sell my much loved XTR Jeff Jones style single speed or 1x9/ 1x10 (what I ran them with) cranks.
They are in OK condition, when converted to the 'Jeff Jones' style they were finished with a brushed / brilo pad finish rather than polished, this could be re-done or if your like me you can just fit them and ride!!
They have a few marks here and there, most noticeable is on the back of one of the cranks arms where the chain looks to have come of and rubbed. I will clean them as well before I post!
I also have a 32T middleburn ring that I will include. Please not these cranks have a different BCD for chainrings so normal ones will NOT fit and you need to use the middleburn ones.
The crank arms are 175mm and they use a normal HTII bottom bracket - same as XT, SLX, Hone etc.
Plastic end cap included.
These are very light and to my knowledge have a TI axle.
Anyway heres the pics..
XTR cranks by Jackass123456789, on Flickr
XTR cranks by Jackass123456789, on Flickr
Untitled by Jackass123456789, on Flickr
Untitled by Jackass123456789, on Flickr
£85 Posted 1st Rec
email me at leeandrews@wc-freeriders.co.uk if interested.
