I'm selling my Industry Nine/Flow build wheels. They're red classic hubs built on to custom red, powder-coated Stans Flow rims using black DT Comp spokes and DT brass nipples. The wheels were built by Just Riding Along in December 2009 so are about 14 months old. You get all the advantages of the I9 hubs with their super fast pick up (66% faster than even Chris King) and complete axle compatibility without the annoyance of the proprietary spokes and their terrible availability and difficult build and these wheels are still really really stiff. They weigh about 1850g for the pair.
I've just had a full new set of bearings put in both hubs prior to selling and the wheels have not been used since. They are currently fitted with a 20mm front axle and a brand new QR rear axle although they will also be supplied with a 10x135mm bolt through compatible rear axle and a Superstar 10mm skewer (these can be fitted if you would like). I will also supply a pair of Stans Flow rimstrips to allow the best possible tubeless performance.
The wheels are completely straight, free from buckles and all the tensions are even. There are a couple of small, cosmetic scratches on the rims but nothing major at all.
Pics of the wheels when they were first fitted here:
http://s90.photobucket.com/albums/k276/matthew_h/Nomad%20build/Nomad%20Dec%2009/
I can supply further photos if required.
Cost when new, when including all the extras, was over £800.
I'd like £450 and will post them out for £10.
Price is negotiable and they can be collected from Sheffield/Hope Valley if needed.
Contact me on matthew@screamingjaffa.co.uk or reply here
