FS: clearout 12mm, 20mm stuff commencal hangers. Crank bolts

3 posts & 2 voices | Started 3 months ago by Telemaster18 | Latest reply from Telemaster18

Tags:

No tags yet.

Telemaster18 - Member

I've got 20mm adaptors for front pro 2 hubs like these...... http://www.chainreactioncycles.com/Models.aspx?ModelID=10237 but without the washers. 8 posted

Rear hope pro 2 conversion for 12mm bolt through conversion like this..... http://www.chainreactioncycles.com/Models.aspx?ModelID=21849 both the end bits are silver. 12 posted

12mm bolt through axle like this http://www.chainreactioncycles.com/Models.aspx?ModelID=20500 it might not be this one but it's a black axle. 150mm. 12 posted

Commencal Dropouts/hangers for 12mm conversion. Both sides like these two..... http://www.chainreactioncycles.com/Models.aspx?ModelID=72247 and http://www.chainreactioncycles.com/Models.aspx?ModelID=72245
7 posted each or both for 12 posted.

Some black ISIS/octalink crank bolts. NC17 M15 on them. 5 posted

If you want pics to show condition etc I can sort that by email telemaster18@hotmail.com

Cheers.

Posted 3 months ago #
snax - Member

I'll take the crank bolts... I've got one working lose every 20mins or so at the moment... and it's doing my head in...

Posted 3 months ago #
Telemaster18 - Member

No problems chief. Paypal is the above email. Will get them posted off over the next couple of days as long as I can get out of work early! Teachers don't finish at 3 contrary to what some believe.

Cheers,
Josh

Posted 3 months ago #

Reply

You must log in to post.