Hello all

I recently had my float 36 fit forks serviced. They did an oil change and replaced the seals. It was a reputable shop but a 7 hour drive away from here ( alpine bikes at inners ). They felt way too stiff straight after so I have been releasing the air pressure each ride since. I noticed that I have only been getting just over 60% travel so released all the air and still the same problem. The available travel feels as it should but I just cant compress them past the 60% mark !any ideas what could be the cause? too much oil ? Thank you

I think I’d drain them and refill with the correct quantity and then see where you are

Cheers ,
is it fairly straight forward to do myself or best sent to lbs ?

I guess that would have to be your shout really, I don’t find it too difficult

http://service.foxracingshox.com/consumers/Content/Service/Forks/1.0_Fork_Disassembly.htm