Photos can be viewed larger in this flickr page.
Gifty/no fees paypal or bank transfer please, at these prices it's hardly worth selling them with paypal fees on top. Email in profile, paypal address same as email.
NC17 imperator pro for normal 1 1/8" headtubes.

Like this one and £33 new on crc. Bought because it had a slightly taller lower cup for crown/downtube clearance, now superceded by shiny new one. Tapered roller bearings which are fully dismantle-able and whils rollers and steel races are dull, still spins smooth when its all back together again: freshly regreased. Apparently only 98g. Complete with box, instructions and the crown race installer 'tool' (a tapered steel ring stop you trashing the race putting it on. But obviously used, plenty of little nicks and bottom of crown race flat but untidy from removal. £7 posted.
Cane Creek from '08 specialized epic.

Normal 1 1/8th headtube again. New cane creek lower bearing and not-new but smooth upper one salvaged from a different headset. Anodising and laser etching worn, and brown is literally and figuratively a rather 'marmite' colour! No top cap or bolt. £7 posted.
Cane creek ZS semi-integrated headset.

Bearings flushed and regreased so life left in them, even if they don't feel brand new. Includes unbranded top cap and bolt. £7 posted
Unbranded threaded headset for 1 18" fork/frame.

Came off my old GT palomar years ago when I upgraded fork after purchase: literally a few rides old, bearings A1 and races immaculate. Complete with all bits, no top cap of course as you'd be using a quill stem with this one. £6 posted.
M-part hydraulic hose guides.

These are the ones you attach to your fork crown and lowers, hose slides up and down through upper guide (on crown) and held fast by lower one. Some wear of plastic 'liner' of upper guide but plenty of life left. £3 posted.

