Viewing 2 posts - 1 through 2 (of 2 total)
  • FORK- 2015 32 TALAS 27.5
  • ian-r
    Full Member

    Has anyone got one of these forks?
    If I use the fox psi table for my weight I end up with about 5mm of sag. Most of the other fox units have about 110psi but the Talas units have a figure of 175 psi ( I’m a fat knacker!). If I drop the pressure down to about 100-110 psi it seems ok.
    The fork also loses pressure when I disconnect the pump. It’s not just the pressurised air in the pump as the pressure will be about 20 psi lower if I reconnect.
    Is there an issue with these forks I should be aware of? Any solutions ( other than buying Rock Shox fork)?

    beicmynydd
    Free Member

    Don’t worry about the number just set the sag as required. I find as you when I remove the pump the small amount of air lost when removing the pump made a difference.
    5 weeks after getting them I’m still not 100% where I need to be running less sag to get less dive.

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘FORK- 2015 32 TALAS 27.5’ is closed to new replies.