The Frame was bought in March this year, and wasnt built until April, and has spent the last month and a half under the stairs in its box, with sadly for me little use in between.
The frame comes with the original 'Cotic' chainstay protector as well as a 'CC' quick release seatpost clamp (as supplied new) and a new style Hope bolt up clamp. The frame is in good condition with the only things of note being a slight scratch on the top tube (see pic) and a bit of scuffing on the insideof the driveside chainstay where i dropped the chain running 1x9 sans guide. I touched it up afterwards
and applied some heli-tape so the area is protected should it happen again (see pic), however I stripped the bike before riding again.
This really does build into an ace bike (as im sure most of you know/have heard) and encourages some sillyness, and I'll be sorry to get rid, but needs must and that.
The frame is a 19inch. Gritstone with Scotchbrite graphics.
£200 Recorded delivery.
DSCF0605 by e1ys1um, on Flickr
DSCF0604 by e1ys1um, on Flickr
DSCF0606 by e1ys1um, on Flickr
DSCF0607 by e1ys1um, on Flickr
Halo Freedom Disc Wheels (front & rear).
Front is 32 spoke and can be run, qr 20mm or 15mm (only 20mm and qr included).
Rear is 36 spoke and can be run qr, saint 135mm, M10x135 or M14x135 (only qr is included)
Front is currently set up for 20mm Bolt through.
Re-trued and front/rear bearing chnage about 6 months ago, little use since. Usual scuffs and scratches,and a small ding in the rear rim
side wall (not noticeable from inside the rim when tyre removed).
Will also come with...
Front has a Maxxis High Roller FR Single Ply Tyre (wire) 2.35 60a and an Shimano XT RT75 180mm Rotor.
Rear has a Maxxis Larsen FR Single Ply Tyre (wire) 2.35 60a, with a Shimano XT RT75 160mm ROtor and a Shimano XT 9 speed cassette, 11-34
(6 months old, 400miles tops) and a Shimano XT qr lever.
Great set of wheels that have been great in use, the only reason i changed the bearings is because i was laid up and bored!
Was going to keep in case i built another bike back up, but thats not going to realistically happen any time soon.
£150 Recorded delivery. No Split.
DSCF0637 by e1ys1um, on Flickr
DSCF0630 by e1ys1um, on Flickr
DSCF0631 by e1ys1um, on Flickr
Used 175mm Silver crank arms (no rings) of the Single Speed. They are ISIS cranks and they will come with a Truvativ Giga-Pipe bottom bracket which is about 5 months old, and runs perfectly.
They are branded GENESIS (off my IO). The Genesis logos are just visible, but would be just right for a polish/tart up if you fancied 
The bottom bracket is 68mm with a spacer (supplied) or no spacer for 73mm. 113mm spindle length.
The cranks can not take 3 rings unfortunately as the area for the granny has not been tapped out, so either SS, 1x9/10 or possibly 2x9/10 but with no granny. Cant say more than that as i used them SS.
Overall they are in good condition with just the usual heel scuffing of the logo area, no cracks or dents etc.
All crank bolts and bb spacers are present.
£25 Recorded delivery.
DSCF0623 by e1ys1um, on Flickr
DSCF0624 by e1ys1um, on Flickr
Charge Spoon Cro-Mo Railed saddle. Brown. In good condition apart from a slight scruff/wearing away underneath at the back (see picture).
£10 Recorded Delivery.
DSCF0621 by e1ys1um, on Flickr
DSCF0622 by e1ys1um, on Flickr
More pictures available if wanted, just ask.
All items are available for collection/meet-up in Manchester.
Payment can be cash on collection or Paypal Gift, if you dont want to pay by Payapl Gift for any reason then normal Paypal is fine so long
as the buyer pays the fees.
Email in profile.
