Viewing 10 posts - 1 through 10 (of 10 total)
  • Chris King Heavy Duty Front Hub to 9mm QR
  • Swelper
    Free Member

    As title suggests,

    have a CK heavy Duty Front hub and want to convert to 9mm QR or bolt on

    Anyone managed this and any ideas if where one can be procured in the UK

    tomhoward
    Full Member

    Iirc you can’t. Assuming you have a 20mm hub.

    Swelper
    Free Member

    Oh dear this ain’t heading in the right direction

    Swelper
    Free Member

    15mm currently on

    TrevorB
    Full Member

    tom is right, the 20mm hub only adapts down to 15mm.

    d45yth
    Free Member

    Towhoward is correct…it’s only the SD hub that can be setup for a 9mm QR (or 15mm). I bought the larger diameter so that I could use 15mm or 20mm, knowing I’d never use a standard QR again.

    Swelper
    Free Member

    Cheers guys. Just need to decide what to do.

    Clutching at straws but there’s nothing aftermarket is there

    beanieripper
    Free Member

    shirley……..if you purchased a bolt thru only hub, you already know that a qr will kill you…no?

    Swelper
    Free Member

    We all don’t live on a perfect world

    Swelper
    Free Member

    As it happens I’ve had these hubs kicking around for
    some time. So any assumptions are unfounded

Viewing 10 posts - 1 through 10 (of 10 total)

The topic ‘Chris King Heavy Duty Front Hub to 9mm QR’ is closed to new replies.