Viewing 3 posts - 1 through 3 (of 3 total)
  • chainring bolts/compatibility
  • elaineanne
    Free Member

    ok ive just replaced my chainrings to….”blackspire”….only second ride in and ive lost a chainring bolt and the others were loose. ive used my original chainbolts which were ‘raceface’….. the middle ring is fine , so just the innerring seems to be the problem..loose bolts… do i need to get blackspire chain ring bolts..and if so are they one size ?…ive looked on crc website and the raceface are alot shorter than the blackspire bolts in length..the blackspire look long to me…
    any advice cheers… 😉

    elaineanne
    Free Member

    i think these are wot i have on at the mo
    http://www.chainreactioncycles.com/Models.aspx?ModelID=40570

    and these are the blackspire chainbolts
    http://www.chainreactioncycles.com/Models.aspx?ModelID=35865

    boobs
    Full Member

    Measure the depth of the hole on the crank this should let you know what you need. I assume (dangerous) that the inner ring bolts screw into the crank spider rather that screw into a nut, like these.

    http://www.chainreactioncycles.com/Models.aspx?ModelID=7064

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
Viewing 3 posts - 1 through 3 (of 3 total)

The topic ‘chainring bolts/compatibility’ is closed to new replies.