Viewing 4 posts - 1 through 4 (of 4 total)
  • Carbon Scalpel headset cups.
  • granny_ring
    Full Member

    Following on from my other thread about the lefty forks, I want to swap the headset cups around and have the taller cup at the bottom to slacken the head angle a tad.

    Was just about to try the cup remover but it doesn’t clear
    the bearings which are tight in there and don’t want to ‘push’ out.
    BUT I have a thought, as the bb30 cups are bonded into the frame would the headset cups be also?
    If not how do I get the bearings out before it’s hammer time again..?

    Thanks

    onandon
    Free Member

    Cups are bonded. Bearing should tap out with light tappy tap taps.

    granny_ring
    Full Member

    Bugger, that’s **** that plane then…..
    Cheers.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    granny_ring
    Full Member

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Carbon Scalpel headset cups.’ is closed to new replies.