As title really Im looking at getting some new forks for my pitch and most of the good deals are with tapered forks??
is there a headset conversion or something that will allow me to fit this type of forks??
cheers
steve
Bike Forum
can i fit tapered forks to a non tapered head tube??
-
Posted 5 months ago #
-
No.
Posted 5 months ago # -
Maybe.
Forks tapered 1.5" to 1 1/8 will fit in non-tapered 1.5 headtube (with an adapter at the top) They won't fit into a 1 1/8" headtube though (unless you use an inverse shim)Posted 5 months ago # -
no
Posted 5 months ago # -
the answer is yes if its a 1.5" headtube
Posted 5 months ago # -
ah pish !!! back to the drawing board then....
im after a set of 150/160mm air forks normal steerer and 20mm front hub.....
suggestions please, new or used !!!
Posted 5 months ago # -
a pitch aint 1.5
Posted 5 months ago # -
Revelations have been superb on my five, 20mm maxle and air + and neg. Survived a battering at home and abroad.
Posted 5 months ago # -
I thought you could fit one to an internal headtube with an adaptor headset thingy.
Posted 5 months ago # -
cant you have the 1.5 steerer pressed out and a 1. 1/8 one made up and pressed back in, as you say some stoming deals on the tappered type, money saved could go towards that, of course use a good eng comp
Posted 5 months ago # -
I have a tapered headtube
Where are these storming deals???
Posted 5 months ago # -
Where are these storming deals???
Right here!
As long as you want some 180mm RS Domain 318s in white
Posted 5 months ago # -
I just ordered some 160mm tapered vans from the same seller so I will let you know when they arrive, if you were interested in ordering from him. Sam
Posted 5 months ago #
Reply
You must log in to post.
