Viewing 8 posts - 1 through 8 (of 8 total)
  • Can i alter the travel on my Fox Vanilla forks?
  • Mugboo
    Full Member

    Stupid question? Sorry if it is..

    nbt
    Full Member

    yes, I assume they're not talas so you will need to take them apart and swap the spacers around. There's a good guide in the manual

    LoCo
    Free Member

    You can adjust travel on earlier models. From 2007 (140 mm travel) onwards they're fixed I'm afraid.

    gamo
    Free Member

    Not on later ones.

    househusband
    Full Member

    You can if you're not afraid to cut the spring… a mate shortened his 36's.

    nbt
    Full Member

    my bad sorry! have had 3 sets but all are older than 140

    LoCo
    Free Member

    Cutting the spring will affect the spring rate, raising it i.e making it stiffer due.
    Also after having cut the spring the end needs to be made flat.
    Some Titanium ones were done for 36's when I was at Mojo using the springs from the Mojo X1 usd dh fork. It was a bit of a faff TBH.

    Mugboo
    Full Member

    Bugger they are 140's.

    They are on my Summer Season and i know its only 10mm but on real steep ups i don't always clean em.

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Can i alter the travel on my Fox Vanilla forks?’ is closed to new replies.