Viewing 2 posts - 1 through 2 (of 2 total)
  • Boardman HT 2010 front mech type
  • tonys102
    Free Member

    Hi all

    Can someone help me on this matter. I have just acquired the frame above, and I am trying to chase down the front mech type and clamp size. It didn’t come with one, and I am struggling to get a decent response from anyone.

    Is there someone with this bike that can help.?

    Thanks

    wukfit
    Free Member

    If it’s a Boardman HT Pro, an 10 speed, I reckon it’s one of these
    http://www.chainreactioncycles.com/th/en/sram-x9-3×10-low-clamp-front-mech/rp-prod84888
    http://www.chainreactioncycles.com/th/en/sram-x0-3x10sp-low-clamp-front-mech/rp-prod84875
    That’s based of a quick google search and reading some pictures
    You can measure your seat tube diameter across the top of the tube to make sure it’s the right size
    You could use a cheaper model, but if you go high clamp (personally find last longer) you’ll have to get a new front cable as your current won’t be long enough

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘Boardman HT 2010 front mech type’ is closed to new replies.