Viewing 11 posts - 1 through 11 (of 11 total)
  • Block paving costs.
  • zippykona
    Full Member

    What should we be looking at per square metre? It will have a car parked on it.
    It’s roughly 7 m by 2m . Was quoted £2800 to dig down 12 inches , lay plant membrane , concrete then blocks.
    As we had a far larger area done in the back garden in Indian Sandstone for £4000 it seems excessive.
    Surrey prices.

    swdan
    Free Member

    Think we had about 5.5 x 3.5m, some new picket fence, a flower bed (but no planting) and disposal of all the rubbish (lots of concrete flags and assorted rubbish from the previous owners) for about £4,500. London/Surrey prices – Worcester Park

    swdan
    Free Member

    Acyuslkt, might have been a bit more but included the council doing the kerb. Either way it might be a bit high but not too far off. we found there was quite a difference in quotes and proposed methodology

    wrightyson
    Free Member

    Quick work out whilst lay in bed…

    Pack and half of pavers £200
    Machine and dumper for the day £200 (if needed)
    1 skip £200
    6 tonne type 1 £200 (overkill)
    Membrane £25
    Washed sand x2 £80
    Kiln dried £10
    Keybond £10
    Fuel £20
    Two men 1 day to reduce dig and prep £400 (nice rates)

    Total £1345

    Leaving £1455 to lay.

    = £100 Sq/m ish

    Or 700 quid each for the second (easy) days labour…

    Currently paying £18 sq/m to our lads on site with worked prepped prior by me.

    (I appreciate business running costs not taken in to account etc but it’s a **** high quote)

    What’s your address 😆

    And why concrete?

    MoreCashThanDash
    Full Member

    Doesnt sound far out. We got quotes for our drive a few years ago and it was thousands – 4m x 20m roughly.

    Just tarmaccing had me screeching that even I could buy a bike for that!

    Nex time I’ll ask wrightyson as he’s just down the road.

    beaker2135
    Full Member

    £50/m plus blocks is what I paid

    zippykona
    Full Member

    Where are you based beaker?

    twinw4ll
    Free Member

    Machine and dumper for 7m x 2m, i’d be getting me pick and shovel out for that.

    wrightyson
    Free Member

    I was trying to “justify” some of the ridiculous quote.
    Quick word with the lads on site who are putting me 80 m/sq down in 2 1/2 days and they reckoned it’s a good grand over…

    zippykona
    Full Member

    Just had a quote from a guy that did my friend’s drive of £1400. Sounds reasonable and he does a good job.

    beaker2135
    Full Member

    Sorry zippykona I’m in N/E Cumbria

Viewing 11 posts - 1 through 11 (of 11 total)

The topic ‘Block paving costs.’ is closed to new replies.