I need new bearings on my zaskar 9r. Needed for the pivot mounts on the rear triangle.

Taken them out tonight and one is totally siezed hence the issue I am getting. However upon someones advice I took them out to get the number off the side. However they are so covered with ground in crap I cannot make it out.

Measured with a tape measure and internal dia is 1 1/8 and external is 1.5. So do I need 1 1/8 replacement bearings or 1.5 replacemens. The angles are 36/45.

Cheers

Ash

This leads me to believe that they are 1-1/8″ headset bearings, so they should be easy to find.