I’ve got E thirteen single ring cranks on a covert. Bb is starting to grind, just priced the original threaded bb from lbs at £60.
Anyone know If any other bbs fit this combo?
Cheers

40 Euros plus postage on bikecomponents.de

I don’t think there are any alternatives but CRC are doing them for £40. They were £25 when I bought one last year, wish I’d stocked up now.

I run a BOR bb with my e13 cranks. Comes with enduro bearings that are cheep’ and easy to replace.

I’d look for those over the oem ones. Velobrands do them.

Just replace the bearings. Cranks out, take the plastic seals off. Leave the cups in place, and you can tap the bearings out of the shell from behind with a screwdriver. The Bearings are identical to BB30 ones, I replaced mine from EBay for a tenner.

HG, care to share a link?
As the bearing in my E-13 PF30, are 31 x 41 x 7mm, so not the same as the majority on ebay (most just don’t say)

Thanks guys, ill do some shopping tonight

As the bearing in my E-13 PF30, are 31 x 41 x 7mm, so not the same as the majority on ebay (most just don’t say)

BB30 bearings are 6806s (30x42x7mm) if that helps.

Hopefully these fit

http://www.chainreactioncycles.com/Mobile/MobileModels.aspx?ModelID=82797

http://www.pinkbike.com/news/ethirteen-LG1-Cranks-SRS-Guide-review-2012.html

^it says the bearings are 6806’s so should be just fine! 🙂