I am building a bike, and got myself some wheels. M505's with centrelock hubs. I know there not the best wheels bit heavy but will do for now. My question is this.

I run Avid Juicy 3's which use a 6 bolt rotor. Am I best getting a centrelock to 6 bolt adapter, or buying new centrelock rotors?

Which centrelock rotors will work best?
Is there a recommended adapter? have looked but they do seem to be hard to find.

get rotors, the cheapest center lock ones you can find in whatever size you need 160mm 180mm ?!?

ps if you need a 200mm ive got a saint one unused you can have for £10 posted

i would get centre lock you can pick them up for nothing on EBay as noone wants them I got 2 x 160 for 3 quid posted with lock nuts included.

Adapters will be about 10 -20 quid for a set iirc.

I read somewhere, perhaps it was wrong info, but they said shimano discs are thinner so can cause problems. I would have thought as long as I get 180mm (my size) I should be fine.

any 180 will be fine, dont believe the hype 🙂

Thats good enough for me. Cheers 🙂

have mix matched rotors +calipers avid /hope /shimano makes no difference whatever combo you use. Thin discs are worn ones