Basically I’d like some advice on fitting a set of race face ride 100mm fat bike cranks to my white on one fatty. Does anyone know how many spacers on each side and what size ie 2.5mm?

Any help very welcomed

Exactly that info is available from the rf site as a pdf… Lists every crank and bb shell and spacer combos…

Tried that and can’t find it?

I will look in the morning.

I’ll have a look as well,think I might have 2 drive side and 1 non drive….

Page 4

Actually, this is probably what you want: 😳

(The links for both Cinch and EXI documents on the RaceFace site both point to the Cinch info. The EXI info seems to have disappeared.)

I have 2 large one small on the drive side. Nothing on the non drive side (single ring, non cinch) otherwise the 30T ring is very very close to the chainstay. I’m also using a shimano BB (18months) as the RF one lasted only weeks

Double post

Thanks rocket dog, so you have 6mm of
Spacers on the drive side right?