Does anyone know if standard 32mm Stans Notubes valves will work in Spany Oozy trail 295 rims?

I cant see the recommended valves anywhere apart from CRC and they are out of stock there (Spank Valves for Tubeless Rim).

Not sure about the Stans valves but can’t imagine they wouldn’t work.

I use these on mine

http://www.ebay.co.uk/itm/Mountain-Bike-Road-Bike-Presta-Tubeless-Valves-Blue-For-No-Tubes-conversion-/261983935520?hash=item3cff759c20

I’d have thought any tubeless valve would do the trick.

I have used standard round shaped ones in my Spank wheels and it seems to work fine with the Oohbah profile.

My 35mm Superstar ones wouldn’t fit a pair a mate of mine had built.

Got some of the longer Stans ones, which worked lovely.

Thanks for a advice guys.

My stan’s valves were 42mm after all and once i wrapped the rims twice round in tape, used a hot spike to pierce a hole for the valve and put some Vaseline on the valve they went up a treat just using a track pump.

Didn’t even have to use suds or sealant 🙂