OK... So we have a mega clearout on the go! All prices are posted, i am located near Newcastle if anyone would like to collect. I am out of the country myself so all posting will be done by my brother so it wont be mega quick as it has to go through you, to me, to him...
More photos here... http://s1131.photobucket.com/albums/m559/clubman2803/?start=all
The Specialized and the Yeti in the photos will also be for sale soon, however i need to sort a few things with them first, but if your interested please feel free to ask
Email is willgibson28@gmail (dot) com please contact me on this, will be the quickest reply!
Drivetrain
FSA Platinum Isis bottom bracket, 68mm, with crank bolts
£10

Sram X7 front mech, dual pull, 34.9 clamp but has adapters for smaller
£10

E13 adapter for if you dont have iscg tabs
£4
38t chainring
£6

22t XT chainring
£5

6) FSA rpm cranks, isis type, come with 3 rings 44/32/22
£12

7) truvativ hussefelt isis cranks, quite old decent condition though, threads all good
£10

E13 srs chainguide, probably max 34t looks quite small, got the backplate for it too that sits behind the BB if you dont have tabs, quite worn, no bash guard
£15

Control
35mm quick release seat clamp
£4

Hope reducer headset, 1.5-1,1/8th, anodized blue, hardly used, comes with crown race
£35

bike hut bar ends, about 50mm long
£6

bontrager racelite bars, os clamp about 660mm wide
£7
mongoose os bars 660mm wide
£7
2x bontrager 31.6mm seatposts
£7 each
30.9 mm seatpost, no brand
£6
Titec foam grips, not used much
£5

8)35.4 mm quick release seatclamp
£4

Specialized BG saddle, no tears
£8

10) Pair old shimano spd pedals, good threads
£6
Tyres
Pair maxxis swapthings, 2.35, super tacky compound, 95% tread. folding bead.
£30

Pair DMR Moto digger tyres, 2.35, folding bead, 95% tread
£22

Pair Kenda small block 8s, 2.3, 75% tread
£20

Pair tioga yellow kirrin, 2.3, 95% tread
£20

Pair hutchinson mosquito air light, 2.0, one folding, one wire bead, uber light, 80% tread, not that it looks like they have much to being with, one for the racers i think.
£20

Pair Continental vertical, 2.3, protection, basically unused
£22

Brakes
1)IS-post mount brake adapter, think its shimano, says 74-20 on it
£3
Avid juicy 7 rear disc brake, needs a bleed, no pads, comes with is to post mount for 180mm disc
£15

pair of old hope minis, still feel decent but would probably benefit from a bleed, no rotors or mounts.
£40

4) Front formula oro bianco ltd edition greg minnaar one (i am told), white goodridge hose, works fine however the lever is a bit of a faff... basically the guy i bought it off had got the clamp bolt stuck in so had to drill it out and retap threads, there are new threads in but i dont have a clamp or bolts but you will need to find the right sized bolts and modify a clamp so the bigger bolts fit.
£20

5) Front formula oro k18, spares, caliper body has a crack in, hose and lever good.
£12

Forks
Marzocchi DJ 2 forks, 100mm travel, decent condition, nice and plush
£40

Bikes
Carrera Virtuoso race bike, its not in the best condition, just needs the drivetrain tweaking and a bit of maintenance, also with the brakes. Its a 56cm frame i think, quite large...
£80

GT Agressor 3.0, 14” frame, decent pub bike, will need a bit of maintenance i think.
£50, pick up only

3) Massi Z8 Hardtail Frame, 18", black with carbon seat stay, pretty dam light, there is an Xo rear mech stuck in the hanger but you can't really complain as its an XO mech! comes with headset, FSA seat clamp and post and a square taper BB, been taped up to prevent any cable rub.
£110

Free Stuff (collection only)
1) BMX, crap condition, free to collect

Mavic 729 on dmr hub, hub is nackered, loads of play in it as i ran the 20mm hub with some hope reducers for QR which didnt quite fit...

Halo Tornado wheel, agains hub is fooked, the bearings were nackered to tried to replace them but the outer race of one will NOT come out, im sure it will... i just cant get it out...

Yeti slip on grips
3 x front skewers
truvativ howitzer bb, fairly rough but useable
some mega retro bar ends
old bonty crowbar bar and stem, standard clamp about 640mm wide and 100mm long stem
hayes sole rear brake which the pad adjuster on the caliper is threaded

£664

