456, Hope M4, Schwalbe, SLX, Selle Ital

Classifieds - For Sale

456, Hope M4, Schwalbe, SLX, Selle Ital

21 posts & 13 voices | Started 4 months ago by Tony.w | Latest reply from Tony.w

Tags:

No tags yet.

Tony.w - Member

Need to clear the decks for my new bike

On One 456 Steel Frame 16" has a little chain suck also some scuffs and cable rubs but overall its a good quality frame. Included Q/R seat clamp, Hanger-banger & fittings for V brakes if needed. £85 posted
http://www.flickr.com/photos/16705343@N06/6606317933/in/photostream
http://www.flickr.com/photos/16705343@N06/6606319229/in/photostream/

Hope Hoops proII wheel set in black with Mavic 317 rims to include Schwalbe Rocket Ron & Racing Ralph used but still got a bit of run in them. Set up for Q/R £160 posted
http://www.flickr.com/photos/16705343@N06/6590108505/in/photostream
http://www.flickr.com/photos/16705343@N06/6590108505/in/photostream
http://www.flickr.com/photos/16705343@N06/6590112089/in/photostream

SLX groupset to include Crankset 175mm arms (minimal scuffs), Bottom Bracket spins freely one side silky smooth the other not as smooth but working fine, triple front mech 34.9mm STD inc reducer to 28.6mm, rear mech long cage shadow (small graze), shifters triple & nine and 9sp chain with a lot of useable life in it. £140 posted.
http://www.flickr.com/photos/16705343@N06/6606485897/in/photostream
http://www.flickr.com/photos/16705343@N06/6606490081/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606488777/in/photostream
http://www.flickr.com/photos/16705343@N06/6606536695/in/photostream/

Hope Mono M4s Front (78cm) & Rear (128cm) fully refurbed earlier this year rebuild kits for levers & calipers.Levers have some ano missing where bike was turned upside down for puncture repair (Brother-in-law has not borrowed my bike since) ISO fitments caliper number 3 both. Hope sawtooth discs 183mm & 160mm inc fitment hardware discs are in as new condition and not seen many miles. £145 posted 0r £120 without discs. Discs separate £30 posted.
http://www.flickr.com/photos/16705343@N06/6606484441/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606464795/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606493057/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606494695/in/photostream/

Richie WCS carbo bars 670mm oversize shallow rise very good condition with usual clamp marks from grip/STi mounting. £35 posted
http://www.flickr.com/photos/16705343@N06/6606452447/in/photostream/

Bonty Carbon oversize stem 105mm 20 Deg Very good cond (3 very small marks) shown in pic 2 £35 posted
http://www.flickr.com/photos/16705343@N06/6606452451/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606452467/in/photostream/

Hope Front & Rear wheel skewers in red older type in very good condition. £18 posted
http://www.flickr.com/photos/16705343@N06/6606463303/in/photostream/

Selle ital SLR 135g super light leather/carbon seat mounted to Carbon wrap 27.2mm x 350mm post. Post in very good condition the seat has had the leather wear through on the front left side (from my leg rubbing) its been on a few bike and is still presentable & tidy. Sold togather £35 posted.
http://www.flickr.com/photos/16705343@N06/6606452477/in/photostream/
http://www.flickr.com/photos/16705343@N06/6606452487/in/photostream/

FSA Bash up to 34t I had it on a 36t (just) 104 BCD in great condition inc mounting bolts £10 posted
http://www.flickr.com/photos/16705343@N06/6608347191/

Bash not sure when I used this still 104 BCD up to 36t just? no mounting screws so £5 posted
http://www.flickr.com/photos/16705343@N06/6606535221/in/photostream/

K-nin ali machined bash 104 BCD, use the fittings from your outer triple ring works like a dream. £10 posted. A few scuffs as expected
http://www.flickr.com/photos/16705343@N06/6606533735/in/photostream/

DMR V12s super smooth peds in used condition. £15 posted
http://www.flickr.com/photos/16705343@N06/6606529841/in/photostream/

Racing blades with all the mounting hardware Good cond £18 posted
http://www.flickr.com/photos/16705343@N06/6608402007/

Schwalbe Rocket Ron EVO has been used but still got some life in it. Perhaps be better to go with the wheelset with the white shouders.
£18 posted
http://www.flickr.com/photos/16705343@N06/6606541331/in/photostream/

30.9 x 300 USE carbon seatpost been up and down a few times so outer surface is scratches but clean in the upper area. £20 posted
http://www.flickr.com/photos/16705343@N06/6608466313/

Any other info or pics or any other details please mail me to shireswhitmore@btinternet.com

Thanks

Posted 4 months ago #
santacruzyork - Member

what size are you ? interested in the frame

Posted 4 months ago #
R7CTR - Member

Mailed re bars

Posted 4 months ago #
RealMan - Member

Interested in the saddle, but not the seatpost. £20 for it?

Posted 4 months ago #
Tony.w - Member

Santacruzyork
5'8" I ran a bit of seatpost The smaller the frame the more out the way it was for me handled superb easy to manouver.
Realman no probs just PP & mail to the above address so I know whats what.
R7CTR, mailed you

Posted 4 months ago #
Lionheart - Member

Also interested in the frame, is it an Inbred or a 456? cheers Rich

Posted 4 months ago #
-lucas- - Member

would you take £30 for the v12's and the Hope Front & Rear wheel skewers?

Posted 4 months ago #
Tony.w - Member

Lionheart: 456 for sure yes there are decals saying both but the seat stay lining up with the top tube is a reasuring way of confirming 456.

Lucas: not gonna worry about £3 paypal gift to the above address. Thanks

Posted 4 months ago #
mattjones81 - Member

Interested in the seatpost and saddle - will you take £30 posted?

thanks

email me at mattjonesAThotmailDOTcom

Posted 4 months ago #
Tony.w - Member

Lucasman: send me a address to post to my mail account
Mattjones: I may have been a little hastey in splitting as the saddle is now sold - you can have the post for a tenner? Sorry mail me if interested.

Saddle, V12s & Skewers now gone rest still available and open to reasonable offers

Posted 4 months ago #
Lionheart - Member

Have sent you an email, thanks Rich

Posted 4 months ago #
rtc3000m - Member

£8 for the fsa bash??

Rich

Posted 4 months ago #
sprocker - Member

I will take the fsa bash if rtc does not go for it

Posted 4 months ago #
jontizzle91 - Member

HI, is the 456 still available?
cheers

Posted 4 months ago #
Webby - Member

Hi Interested in the SLX Crankset and BB how much for both?

Regards Webby

Posted 4 months ago #
Tony.w - Member

RTC: Tenner or its not even worth me posting it.
Sproker: available for a tenner
jontizzle: Guy interested at the mo. Have you emailed me?
Webby: email me with your req (hard to keep track of and be fair)

Posted 4 months ago #
jontizzle91 - Member

YGM

Posted 4 months ago #
sprocker - Member

I will take it for a tenner how do you want paying

Posted 4 months ago #
billcolwill - Member

Hi, interested in the mavic wheelset.

please give me a text on 07891623273.

Thanks

Posted 4 months ago #
nick dj - Member

Will take the Bonty stem if still for sale?
How do you want payment?
Nick

Posted 4 months ago #
Tony.w - Member

bilcolwill: Wheel set sold sorry.
Nick dj: YGM

Posted 4 months ago #

RSS feed for this topic

Reply

You must log in to post.

Singletrack Mountain Bike Magazine

Classifieds - For Sale

456, Hope M4, Schwalbe, SLX, Selle Ital

Reply

Don't miss…

Singletrack

Website & Forums

Exits