Overview Chat Bike Members News Women
  • This topic has 5 replies, 5 voices, and was last updated 7 years ago by rone.
Viewing 6 posts - 1 through 6 (of 6 total)
  • 29+ sealant amount
  • dimitry
    Free Member

    Hey. Sorry if this was already discussed.
    How much sealant to put into 29+ tubeless tyre? I put about 100ml but air keeps coming out through the sides after it sets in. I keep turning the wheel from one side to another every 10-15 min like the tutorials say.
    Thanks

    Posted 7 years ago
    benpinnick
    Full Member

    I’d probably put in a bit more than 100 for a 29+ but that wont be the issue. You have enough to seal it – its the tyre & sealant thats the problem it sounds like. You’d only need more than 100ml to give it some lifespan, not to get it sealed.

    Posted 7 years ago
    dovebiker
    Full Member

    100ml should be fine – is the sidewall weeping or is it leaking around the bead?

    Posted 7 years ago
    lotto
    Free Member

    I put 150ml in mine. Maxxis Chronnicle on Scraper i45. No issues.

    Posted 7 years ago
    dimitry
    Free Member

    rabbit hole and nextie jungle fox, stans sealant and just changed chronicles to knards. The bubbles keep coming out around the bead for more than 1.5h before they would hold around 13psi pressure. Everything works but just takes so long.
    Will deffo put 150ml next time.

    Posted 7 years ago
    rone
    Full Member

    I ended up double taping my rims on the Stache. Kept leaking on the supplied tape.

    Posted 7 years ago
Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘29+ sealant amount’ is closed to new replies.

Overview Chat Bike Members News Women